DRV8300: DRV8300

nimesh shewale

Prodigy 120 points

Part Number: DRV8300

WILL DRV8300 WORK ON 1XPWM?

over 3 years ago

0 Anthony Lodi over 3 years ago

TI__Mastermind 26416 points

Hi Nimesh,

Thank you for your question! The DRV8300 does not support 1x PWM mode. If 1xPWM mode is something that is essential to your particular design let me know and I can try to help you select a device that supports 1xPWM mode that fits your design requirements.

Regards,

Anthony Lodi

0 nimesh shewale over 3 years ago in reply to Anthony Lodi

Prodigy 120 points

i require 1 xpwm mode in bldc motor gate driver? is there any IC is in stock with same specifications?

0 Anthony Lodi over 3 years ago in reply to nimesh shewale

TI__Mastermind 26416 points

Hi Nimesh,

What is your supply voltage specifications? What are the current requirements? Is a bootstrap architecture required, or would a charge pump architecture be sufficient? This information will be helpful in determining the best gate driver for your application.

Regards,

Anthony Lodi

0 nimesh shewale over 3 years ago in reply to Anthony Lodi

Prodigy 120 points

supply voltage upto 60V

Current Rating 6A

i'm looking similiar gate driver as drv8320h

0 Anthony Lodi over 3 years ago in reply to nimesh shewale

TI__Mastermind 26416 points

Hi Nimesh,

Since the supply voltage is up to 60V, I would recommend using a DRV835x device. The DRV835x family supports 1xPWM mode. If you are looking for one similar to the DRV8320H, I would recommend the DRV8350H device. The DRV8350H device has a similar feature set compared to the DRV8320H, but one important differentiation of the DRV8350H device that I will point out is that it can support up to 100V, with an abs max of 102V.

Regards,

Anthony Lodi

Motor drivers

Motor drivers forum

DRV8300: DRV8300