Other Parts Discussed in Thread: MCF8316A, MSP-EXP430FR2355
Dear community,
I would like to debug a simple Arduino software to Read and display on the Serial and to Write on the MCF8316A directly through I2C connected to MCx_SCL and MCx_SDA pins after removing these 2 jumpers on EVM board.
After several trials and checking on datasheet and forums I cannot have I2C working (motor stopped, even by adding 100µs delay).
Can you please share a simple (tested and working) code lines example to Read the value and to Write a new value on SPD_LOOP_KP from the register 8Eh CLOSED_LOOP4 please ?
Many thanks.
Best Regards,
Julien