DRV8350: Please review the deign check wheather DRV8350SRTVT is compactable with CSD88599Q5DC bridge

Hi Rony,

So far the schematic looks good in regards the DRV8350. I'll need to do a full review in order to address your second concern to check whether the DRV8350SRTVT and CSD88599Q5DC are compatible in the way you have laid out in your schematic, I will get back to you with a full review by next week.

In the mean time a few things to keep in mind during design: 

Place bulk and bypass capacitors as close as possible to the DRV device (VCP, CPH-CPL, VM, VGLS, DVDD, AVDD, PVDD, GVDD, etc.). 

DRV caps should be placed on the same layer of the PCB as the DRV to ensure that there is not added inductance due to vias placed in the capacitor path.

You can also compare your schematic to the schematic of the EVM found in the design files here: DRV8350S-EVM Design Files

Regards,

Yara