• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 177 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MCF8316AEVM: MCF8316 reset issue

Cherry Zhou
Mastermind 22235 points
Part Number: MCF8316AEVM

Hi Team,

Would you help share how to reset MCF8316 when it reports error as follows:

Thanks.

Best Regards,

Cherry

  • 0
    TI__Genius 13235 points

    Hi Cherry,

    I am assuming that the error is that the Reference for Speed Loop and Speed Feedback are not the same, if so can the following questions be answered?

    1. Is speed loop enabled? This can be check by checking if SPEED_LOOP_DIS in CLOSED_LOOP 1 is set to 0h = ENABLE.
    2. What are the values in the SPEED_REF_CLOSED_LOOP and FG_SPEED_FDBK registers when the GUI shows this large difference shown in the capture?

    Regards,

    Joshua