• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 140 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2605LEVM-CT: Customer would like top study DRV2605L function but don't know how to start!

Paul Yeh
Genius 13625 points
Part Number: DRV2605LEVM-CT
Other Parts Discussed in Thread: USB2ANY

Hi Team,

My customer plan to design this solution but seems too complicated.

I request EVM board for them but don't know how to start it.

May I know do we have presentation material to teach how to control motor?

Thanks

  • 0
    TI__Expert 4610 points

    Hello,

    Thanks for reaching out. We have two documents for this, the EVM User Guide and Quick Start Guide. If you would like the utilize the GUI, Haptic Control Console, you will need a USB2ANY. We also have a User Guide for Haptic Control Console. The default EVM jumper position allows for quick operation as you just need to power the EVM via USB and then you can control the motor with the capacitive touch buttons (you can refer to section 1.2 Quick Start Board Setup in the EVM user guide to double check the default EVM setup). 

    Regards,
    Sydney Northcutt