Other Parts Discussed in Thread: MCF8329A
이 보드로 BLDC모터를 제어하려고 하는데 첨부한 사진과 같이 MPET RESULT를 보면 Resistance 및 inductance 값을 기입할때 모터의 상저항인지 선간저항인지,
inductance는 모터 코일의 인덕턴스인지,모터 자체의 인덕턴스인지 혹은 모터의 무부하 인덕턴스 값 중 어느값을 넣어서 모터를 돌려야 하는지 문의 드립니다.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
이 보드로 BLDC모터를 제어하려고 하는데 첨부한 사진과 같이 MPET RESULT를 보면 Resistance 및 inductance 값을 기입할때 모터의 상저항인지 선간저항인지,
inductance는 모터 코일의 인덕턴스인지,모터 자체의 인덕턴스인지 혹은 모터의 무부하 인덕턴스 값 중 어느값을 넣어서 모터를 돌려야 하는지 문의 드립니다.
Hello Seo,
For information about the MPET parameters please refer to our FAQ on motor parameters as these are what MPET will measure. Due to a limitation with the MPET algorithm on the MCF8329A, MPET will not measure R and L and these will need to be measured manually or MPET will get stuck attempting to measure the R and L values.
Hope I was able to answer your question!
Regards,
Joshua
Hello Seo,
Please let me know if I was able to resolve your question!
Regards,
Joshua