Other Parts Discussed in Thread: MCF8329A
Hi,
Can I have a video guide to set the MPET parameters to start spinning the motor?
Thanks,
Biagio
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Can I have a video guide to set the MPET parameters to start spinning the motor?
Thanks,
Biagio
Hello Biagio,
Thank you for your E2E post! Your thread has been assigned to one of our team members who is currently out of office. Please allow up to a week to respond to your question.
Regards,
Joshua
Hello Biagio,
We have a getting stated video for the MCF8329A that should be helpful. This video can be downloaded using the following link: https://tidrive.ext.ti.com/u/gjWC3za1gsWQNYLJ/03ca804d-4764-47b7-93ef-dd46c5ac18d7?l
Access Code: 45psk/dz
The video download link will expire on April 14.
For instructions on how to hand measure the motors parameters please refer to our FAQ on Motor Parameters: https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1213224/faq-what-are-motor-parameters-why-are-they-needed-and-how-do-i-measure-them
Regards,
Joshua
Hi Jeong,
Updated download link here:
https://tidrive.ext.ti.com/u/_XR8pGh0fJDvdHyo/b75beb95-f9d9-44be-b770-9f14865dcd03?l
Access code: 6Nqyn$P6
Regards,
Eric C.