Hi Team,
I am using DRV8842-EP to drive a solenoid valve. I am making the circuit as per the reference diagram provided in the data sheet. I have doubt regarding a capacitor value. In the datasheet of DRV8842-EP ,t he typical circuit diagram section shows different value and PCB diagram shoes different value.
On page 13 of datasheet. The below diagram is given. The valve of the capacitor between VM and Ground is given as 0.01uF . In the PCB (2nd picture) layout diagram , the recommended value is different. Please suggest a right value of the capacitor and voltage rating as well.
1st Picture
2nd Picture
Thanks & Regards
Sudesh
