Regarding the NC pin (15pin) on page 10 of the data sheet "drv8906-q1.pdf", it is written as "Not connected", but is it okay to use it with the terminal grounded to GND?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Regarding the NC pin (15pin) on page 10 of the data sheet "drv8906-q1.pdf", it is written as "Not connected", but is it okay to use it with the terminal grounded to GND?
Hello,
Yes, connecting it to GND is fine.
Best,
Jacob