• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 491 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8307 Using of Hall element at EVM

masahiko shimizu
Guru 11235 points
Other Parts Discussed in Thread: DRV8307EVM

Hi,

My customer tries to operate motor with DRV8307EVM.
They use the hall element. it is "HW-105W".
VM=24V.

At this case, What are we select at JP3 and JP4?
I think think that we select the following.
Is it correct?


JP1:1-2 -> VSW
JP2:Open -> 180ohm
JP3/4:1-2 -> Hall wire in normal order

Best regards,
Shimizu


Best regards,
Shimizu