DRV8832-Q1: About PCB Footprint and Land pattern

Yusuke-san,

The package type is HVSSOP and the drawing number is DGQ. In the datasheet, it has DGQ drawing.

BTW, they may also download the cad symbol from:https://www.ti.com/product/DRV8832-Q1#design-development

Hi Li-san,

Thank you for your response.
I checked the specified datasheet.
However,  Land pattern and footprint was not listed.
Could you tell me the dimensions of the land pattern and footprint of DGQ(HVSSOP)?



Best regards,
Yusuke

Yusuke-san,

Now, understand.  DRV8832 has same package drawing as DRV8832-Q1. You can use DRV8832's Land pattern and footprint:

https://www.ti.com/lit/ds/symlink/drv8832.pdf

Hi Li-san,

Thank you for your support.

I checked the Non Q1 datasheet.
However, "land pattern and footprint " information for VSSON was not included.
Could you tell me the dimensions of the land pattern and footprint of DGQ(HVSSOP)?



Best regards,
Yusuke

Yusuke-san,

Please check this datasheet https://www.ti.com/lit/ds/symlink/tps5401.pdf

This issue was caused by the datasheet generator which merged the datasheet main content document and mechanical drawing document. Somehow part of mechanical drawing was missing in some datasheets. Sorry, giving the trouble to customers. 

Hi Li-san,

Thank you for you support.
I checked the TPS5401 datasheet.
However, the thermal pad size was different.
Could you tell me the dimensions and footprint of the land pattern for DRV8832-Q1 DGQ?



Best regards,
Yusuke