Other Parts Discussed in Thread: DRV8876
Hi Motor Driver Experts,
On the DRV8426P, if you hit your current regulation chop point and enter the fixed off time (example being in 24us mode) - when the PWM input changes state, does that timer become ignored?
I am seeing this behavior but the datasheet does not mention this. If I look at DRV8876 datasheet, it does specify this in section 7.3.3.2.1 and I want to see if that is the same for DRV8426P.
(below is a snip from DRV8876)
Thanks!
Reed
