Hello,
the regulation of the rise and fall times of the MOSFETs by the DRV8718 looks very nice.
How fast does the regulation loop needs and how can I make sure that the regulation loop is stable ?
Thank you and best regards,
Luc
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
the regulation of the rise and fall times of the MOSFETs by the DRV8718 looks very nice.
How fast does the regulation loop needs and how can I make sure that the regulation loop is stable ?
Thank you and best regards,
Luc
Hi Luc,
The slew rate control is a closed loop implementation. Section 8.3.4 of the datasheet goes into the details, but does not touch on loop speed specifically. I suspect the feedback and control is analog (continuous), synchronized with the PWM input(s).
Regards,
Mike