According to Table 9 in datasheet,the minimum error current of OCP is 1.7A.
Does it mean that the error cannot be reported when the output current of xOUT is less than 1.7A and is short-circuited to the ground?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
According to Table 9 in datasheet,the minimum error current of OCP is 1.7A.
Does it mean that the error cannot be reported when the output current of xOUT is less than 1.7A and is short-circuited to the ground?