Hi team,
Could you clarify CT = 0pF in the datasheet Table 10-2? This means leaving the CT pin floating or grounding it. Thank you!
Best regards,
Sam Ting
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Sam,
By CT=0pF, we mean leave CT pin floating. If you connect CT to GND, the device will not turn on. CT is connected to the internal gate drive circuitry so any parasitic resistance and inductance must be avoided.
Thanks,
Shreyas