Hello, E2E
When no voltage is applied to VIN
Is there any problem even if a voltage is applied to the EN terminal?
For example
0s: VIN = 0V, EN = 5V
After 100millisecond : VIN = 20V, EN = 5V
Best regards, MITANI
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello, E2E
When no voltage is applied to VIN
Is there any problem even if a voltage is applied to the EN terminal?
For example
0s: VIN = 0V, EN = 5V
After 100millisecond : VIN = 20V, EN = 5V
Best regards, MITANI