• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 141 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PTH08T241W: Capacitors DC bias derating

Carlo
Expert 7715 points
Part Number: PTH08T241W
Other Parts Discussed in Thread: PTH04T230W,

Hi E2E,

For the PTH04T230W and PTH08T241W is the DC bias derating is considered in choosing the capacitance values given for minimum capacitance and TurboTrans capacitance?

Regards,
Carlo

  • 0
    TI__Mastermind 18370 points

    Hi Carlo,

    Please note that in the PTH08T241W data sheet, we mention the capacitance values and not necessarily the value mentioned on the capacitor:

    So if you are using capacitors that are subject to substantial DC bias derating, you need to make sure that the required capacitance values are met after the derating. (final / actual capacitance values ).

    Hope this addresses your question.

    Regards,