I have the same question about the example in the Tech Note here: e2e.ti.com/.../ucc5310-questions-on-external-gate-resistor-design-guide-app-note
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I have the same question about the example in the Tech Note here: e2e.ti.com/.../ucc5310-questions-on-external-gate-resistor-design-guide-app-note
Hi, Sam,
We had a system issue in our editor that corrupted equation 1. The R shown should be RG.
If it's ok with you, I can drop you an email directly to discuss this in further detail.
Best regards,
Don