Hey guys,
i wanted to simulate a Sepic with the LM51561-Q1. I have downloaded the unencrypted file, converted it for LTSpice, but LTSpice gave me an error:
u:1:g_u8_abmii1:
Syntax Error
5u*v(u1:u8_uvlo_ok) << >>}
Thanks
Carlos
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hey guys,
i wanted to simulate a Sepic with the LM51561-Q1. I have downloaded the unencrypted file, converted it for LTSpice, but LTSpice gave me an error:
u:1:g_u8_abmii1:
Syntax Error
5u*v(u1:u8_uvlo_ok) << >>}
Thanks
Carlos
Hi Carlos,
thanks you for using the E2E forum.
Unfortunately I can not help you on the LTSpice as this is not a TI tool I do not have the experience to support here.
I recommend to use the TI PSpice.
Best regards,
Stefan
Hi Carlos,
as i have not received an additional information, I assume this issue is solved and i am closing the thread.
If there is still something open, just reply to open it again.
Best regards,
Stefan