Other Parts Discussed in Thread: LM2597
Hi Team,
My customer is looking for alternate source to LM2594HVN-ADJ/NOPB due to supply situation, can you please advise on the following comparing this device to LM2597HVN-ADJ/NOPB? Thanks!
Comparing the two devices electrically, here are the differences I see:
- Can the Error_Flag, Delay and Bias_Supply pins on LM2597 be left floating?
- Is the enable pin logic the same, or does it need to be flipped (/SHUTDOWN vs. /ON)?
- Datasheet shows the SOIC vs. PDIP junction to ambient thermal resistance values as being flipped in the respective datasheets, can you advise?
- Any other electrical, pinout, or package differences we should be aware of?
Best Regards,
-Kevin Ginunas