Dear team
Does the PG pin(pin 6 ) short to output. Don't use pull high resistor will cause by any issue?
Many thanks
Denny
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear team
Does the PG pin(pin 6 ) short to output. Don't use pull high resistor will cause by any issue?
Many thanks
Denny
Hi Denny,
It should be okay. It looks like this is SOT563 DRL package. So the 6th pin is NC/PG. The pin is floating and can be connected to the output also. Please refer to the below screenshot.
Thanks and Best Regards,
Farheen
Hi Farheen
Sorry the full part number is TLV62568ADRLR.
Does the PG pin(pin 6 ) short to output. Don't use pull high resistor will cause by any issue?
Many thanks
Denny
Hi Denny,
Yes, for TLV62568ADRL also, 6th pin is NC (not connected inside). So it can be connected to output also without pull up resistor. I do not see any issue.
Thanks and Best Regards,
Farheen
Hi Denny,
Do you still have concern/question related to this thread?
Thanks and Best Regards,
Farheen