Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 202 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV62568: Query related to "Table 4. Matrix of Output Capacitor and Inductor Combinations" in datasheet of TLV62658

Rohidas Sawant76
Intellectual 360 points
Part Number: TLV62568

Hi !

I am refereeing section "8.2.2.3 Output Filter Design" from datasheet of TLV62658.

Under this section Table 4 is mentioned about matrix of Output capacitor and inductor. Please refer below image -

In above table, I am not able to understand meaning of  "+" and "++" notations. Also, what is the meaning of blank cells ?

Please explain me the meaning of above notations.

Regards,

Rohidas.

  • 0
    TI__Genius 14960 points

    Hi Rohidas,

    "++" sign means that it is the most recommended combination that is validated by the Lab measurements and can provide the best results without any stability concerns. Then after that "+" is also the second recommendation if needed. While the ones that are blank are not tested completely in Lab but can be used as one of the option if required after proper bench evaluation. 

    e.g. In your screenshot, there is ++ sign for 2.2uH inductor is because that is the most recommended value. High inductor value will have lower ripple while lower inductor value will result in high ripple as compared to high value of inductor. That’s why 2.2uH has ++ sign and 1uH has + sign.

    I hope you understood. 

    Thanks and Best Regards,

    Farheen

  • 0 in reply to Farheen
    TI__Genius 14960 points

    Hi Rohidas,

    Do you have any further question related to this thread?

    If not, then please close this thread by clicking on Resolved button.

    Thanks and Best Regards,

    Farheen

  • 0 in reply to Farheen
    TI__Genius 14960 points

    Hey Rohidas,

    I am closing this thread for now. If you have any further question related to this thread, please feel free to open it by commenting below.

    Thanks and Best Regards,

    Farheen