TPS2378EVM-602: TPS2378EVM-602

Muhammad Usman Qazi

Part Number: TPS2378EVM-602
Other Parts Discussed in Thread: TPS23730

Can i power up my TPS2378EVM-602 board from non cisco poe++ switch?

Or i need only cisco switches for powering the board.

0 Michael Pahl over 2 years ago

Hello,

This design is specifcally made to meet the forced -4-pair UPOE specification. This does not meet IEEE802.3 spec, it is a different specification.

If you want an IEEE802.3 51W compliant design, check out the TPS23730.

If this post answers your question, please indicate so by marking this thread as resolved. Thank you.

Regards,

Michael P.

Applications Engineer

Texas Instruments

0 Muhammad Usman Qazi over 2 years ago in reply to Michael Pahl

Thats fine.

But how can i power up my TPS2378EVM-602 board? From which switch

+1 Michael Pahl over 2 years ago in reply to Muhammad Usman Qazi

TPS2378EVM-602 is compliant to the Cisco UPOE standard. Therefore it requires a UPOE compliant switch.

If this post answers your question, please indicate so by marking this thread as resolved. Thank you.

Regards,

Michael P.

Applications Engineer

Texas Instruments

Power management forum