Other Parts Discussed in Thread: TPS2560
The explanation of Milo is still not clear to me.
What is the difference if TPS2560/1 and TPS2560/1A.
The Ios is specified different. On the other hand the caluclation formula is the same.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, Martin,
Got your question, will reply you later.
Bob
Hi, Martin,
It's a historical reason. There were some customer asked us guarantee 2.1A to 2.5A current limit including external +/1% resistor in production, which can't be met by TPS2560/1, so we release TPS2560/1A to ensure the current limit from 2.1A to 2.5A and state it in datasheet as below.
So the calculation formula is same, but the monitor point is different.
Regards,
Bob