TPS68470: looking for PMIC Camera application

Part Number: TPS68470

Hi team,

My customer is looking for PMIC for Camera and its power requirement as below;

1) 1.8V /0.3A

2) 2.8V / 0.3A

3) 1.05V / 1A+0.7A,

5) 5V / 1A (during 1ms)

I have already promoted TPS68470, but they said no LED driver is necessary.

would you please suggest best solution?

Best Regards, NY

0 Tomi Koskela over 2 years ago

Hello,

I have assigned this thread to product expert. Please expect some delay in response due to US holiday today.

Thanks.

Regards,

Tomi Koskela

0 NY over 2 years ago in reply to Tomi Koskela

Hi Tomi, Thanks your support, but no one reply on this, would you please answer on this request.

Best regards, ny

0 Gerard Copeland over 2 years ago in reply to NY

Hi NY,

Apologies for the delay. I have some questions to better understand the application and see if TI has a compatible PMIC.

What kind of camera is this application?
What is the system input voltage?
Please clarify the "1A + 0.7A" current requirement - does this mean the 1.05 V rail must support up to 1.7A?
Please clarify the "during 1 ms" requirement - does this mean the 5 V rail will see a 1 A transient for 1 ms?

Thanks,

Gerard

0 NY over 2 years ago in reply to Gerard Copeland

Hi Gerard, Thank you very much for your reply. let me move to internal discussion for more details. contact to you separately.

Power management forum