hi, can you tell me possible max voltage at SNS pin? the voltage is proportional to output current, but is this clamped at certain voltage? (like in overcurrent event)
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hi, can you tell me possible max voltage at SNS pin? the voltage is proportional to output current, but is this clamped at certain voltage? (like in overcurrent event)
Ito-san,
The maximum current that can flow out of the SNS pin is when the device enters the faults state.
Then the output of the sense pin is I_SNSFH from the datasheet which is a maximum of 5.3mA.
Please make sure to adjust the sense resistance as appropriate for your controller or ADC.
Thanks,
Shreyas