• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 63 subscribers
  • Views 182 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Powering Vin with 6V

Gregory Zschunke
Prodigy 40 points
Part Number: TPS65233-1

I would like to power the TPS65233-1 with 6 V.  Should I connect the 6 V to VIN and VCC, just VIN, or something else?  The data sheet says VCC is an internal 6.5 V power supply, and that when VIN is 5 V, connect VCC to VIN.  So I'm trying to figure out what to do when VIN is 6 V.