• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 72 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM25118: Generate 4 isolated output

Dylan You
Intellectual 2630 points
Part Number: LM25118

Dear teams,

Whether LM25118 can implement following requirements?

Vin: 5-36V

Vout: 4 output with voltage 8V; Output current are 30/30/30/80mA, totally 170mA.

Customer is planning to achieve isolation at the output side with ratio 1:1 transformer to do that.

If you think LM25118 is not appropriate, could you help recommend one device?

Thanks!

Dylan

  • 0
    TI__Mastermind 45101 points

    Hi Dylan,

    Yes, this device can do that but might even be a little bit oversized as a asynchronous Converter or Controller would also be able to do this - maybe with even better efficiency.

    So you might want to check the LM515x devices.

    For the topology i would check a Flyback as this would give you already the isolation.

    Bu the way - i understood that all 4 outputs should be isolated against each other right.

    Best regards,

     Stefan

      

  • 0 in reply to Stefan Schauer
    TI__Mastermind 45101 points

    Hi Dylan,

    I assume this issue is solved and I am closing the thread.

    If there is still something open, just reply to open it again.

    Best regards,

     Stefan