Hello Team,
Attached below is the design for LM3492HC-Q1 IC. The parameters considered are Vin= +12V ; Vout= +24.3V; Iout = 120mA. Kindly help me verify this design.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Team,
Attached below is the design for LM3492HC-Q1 IC. The parameters considered are Vin= +12V ; Vout= +24.3V; Iout = 120mA. Kindly help me verify this design.
Hello Bhat,
Please let us have a few days to review this and we will get back to you next week on this.
Thanks Tuan
Hello Bhat,
I did not see anything wrong with the schematic. You have R122 as 10Meg and do not install and this is a resistor that we do not use in data sheet so I just want to bring that up. As far as ILIM you have resistors on your schematic already and you can use the equations in the data sheet to calculate what you need. In addition, we do not recommend any caps on the IOUT pins.
Thanks Tuan