Hi Sir,
customer use TLV62585, and Vin=+5v to Vout=+3.3v/ 3A, but occurred damage during testing.
is there any problem with this schematic?
thanks for your help and support.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Sir,
customer use TLV62585, and Vin=+5v to Vout=+3.3v/ 3A, but occurred damage during testing.
is there any problem with this schematic?
thanks for your help and support.
Hi Tommy,
The recommended value for the inductor for TLV62585 is 1uH as per the datasheet. However, the customer has used 3.3uH inductor in the design. We do not recommend using parameters outside of datasheet specifications. Apart from this, the schematic looks fine to me.
Let me know if you have further questions on this.
Thank you!
Best regards
Sneha
Hi, All
This is Eddie, Emplus(EPS) IQC engineer
Could the TI team help to confirm whether the IC removed by the EPS is a good/NG product?
Hi, All
This is Eddie, Emplus(EPS) IQC engineer
Could the TI team help to confirm whether the IC removed by the EPS is a good/NG product?
If possible, EPS will send 3pcs suspicious IC, please help TI to confirm.
Hi Eddie,
Please contact your local TI sales team or the distributor.
Thank you!
Best regards
Sneha
Hi Eddie,
Can I help you any further? Please let me know. If there are no further questions, please feel free to close this thread.
Thanks!
Best regards
Sneha
Hi Eddie,
If there are no further questions here, I will close this thread now. In case of any questions/comments, please feel free to comment below.
Thanks!
Best regards
Sneha