TPS54360: Inverting Power simulation based on TPS54360

Hi Experts:

One more thing need comfirm: Can the Pspice model or TINA model of TPS54360 support IBB power supply simulation?

My customer tried TINA, and I tried Pspice, and we both didn't get the inverting output voltage.

Thanks & BRs

Marsh 

HI 

it looks SW have waveform right?

can you double check whether you measure the Vout or Vo, from your schematic, Vout=GND=0

Hi,

thanks for your reply.

Vo was measured and it stayed at 0V too, just like the Vout, the red trace in the 2nd Plot. 

One more thing need comfirm: Can the Pspice model or TINA model of TPS54360 support IBB power supply simulation?

My customer tried TINA, and I tried Pspice, and we both didn't get the inverting output voltage.

Thanks & BRs

HI Marsh:

I think if SW have switching waveform, the model should be work. Can you send me the Pspice files?

Thanks

Hi Daniel,

Thanks a lot. The tps54360.zip is attached. You can download this on the top of this page.

Thanks.

HI Marsh

I will check it and reply to you soon.

Thanks

Hi Daniel,

Thanks a lot. You solved my question!

BRs,

Marsh