TPS2561A: About Short Protection

Ryousuke Natsume

Part Number: TPS2561A

I would like to check the overcurrent limit during the outgoing inspection of my product. Therefore, I am considering shorting the output terminal of the TPS2561A to activate the overcurrent protection. In that case, please let me know if the TPS2561A will or will not be vandalized. Also, please let me know if short-circuiting the TPS2561A will cause any damage to the TPS2561A.

over 2 years ago

0 Ziv Zhang over 2 years ago

TI__Mastermind 18031 points

Hi,

It integrates current limit and thermal shut down protection. Won't be damaged as shorted to GND.

If you have any other concern, contact me any time.

If you think resolved, please help click 'Issue is solved button'.

Thanks.

0 Ryousuke Natsume over 2 years ago

Prodigy 110 points

The answer is that it will not be damaged, but please let us know if there are any points to keep in mind when short-circuiting outputs during product shipment inspections.

0 Ryousuke Natsume over 2 years ago

Prodigy 110 points

The answer is that it will not be damaged, but please let us know if there are any points to keep in mind when short-circuiting outputs during product shipment inspections.

0 Ziv Zhang over 2 years ago in reply to Ryousuke Natsume

TI__Mastermind 18031 points

Hi Ryousuke,

For detail setup, please refer to datasheet and user guide. Especially input and output capacitors.

If you have any other concern, contact me any time.

If you think resolved, please help click 'Issue is solved button'.

Thanks.

Power management

Power management forum

TPS2561A: About Short Protection