Hi Sir,
The current measured by the ammeter is about 10A, but the READ_IOUT(h'8C) : h'C3AA.
The result calculated by READ_IOUT is less than what the meter measures.
How to explain it ?
Is there any other measurement method or address?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Sir,
The current measured by the ammeter is about 10A, but the READ_IOUT(h'8C) : h'C3AA.
The result calculated by READ_IOUT is less than what the meter measures.
How to explain it ?
Is there any other measurement method or address?
Hi Kevin,
Could you check if you are reading Rail 1 current or Rail 2 current?
You can select the rail from the drop down list on the top right corner of the GUI which is shown below.