• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 110 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ27Z561-R1: Checksum Valid

BQ27Z561-R1: Avg I Last Run and Avg P Last Run

Ryan Wang
Expert 5480 points
Part Number: BQ27Z561-R1

Dear expert,

How often Avg I Last Run and Avg P Last Run will be updated? And by how long duration for average?

Thanks

  • 0
    TI__Mastermind 23091 points

    Hello,

    Avg I/P Last Run is taken over the full discharge period. I do not think it has a fixed average duration. 

    Anytime the gauge switches into DSG mode the average current for the discharge is being measured, when the DSG mode is exited the gauge takes the average from when DSG mode was entered until the DSG mode was exited.

    Regards,
    Jose Couso