• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 135 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

REF5010: Min/Max Inquiry

Renan Santos Adriano
Mastermind 20280 points

Part Number: REF5010

Hello Team,

My customer is using the REF5010IDGKT on a new design.  This is a 10V output device.  They have done some simulations in TINA and have set it up such that they can trim the output from 9.56V to 10.44V.  Is this voltage range acceptable and it will degrade the device over time?  I don't see a min/max output in the datasheet that should not be exceeded.  Is there a min/max output that I do not want to exceed when trimming the device? I appreciate your help.

Regards,

Renan