• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 61 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD17581Q5A: Compare CSD17501Q5A and CSD17581Q5A

Fengyu Leng
Intellectual 900 points
Part Number: CSD17581Q5A
Other Parts Discussed in Thread: CSD17501Q5A

Hi Team,

Our customer want to replace CSD17501Q5A with CSD17581Q5A.

In terms of hardware circuit design, is there anything we should pay special attention to? Could you please give us some suggestions?

Thanks!

Best regards!

Fengyu 

  • 0
    TI__Mastermind 29535 points

    Hello Fengyu,

    Thanks for promoting TI FETs at your customer. Below is a comparison of the two devices. The CSD17581Q5A is slightly higher on resistance and charge compared to the CSD17501Q5A. Depending on the application, there will be higher losses. Other than that, the CSD17581Q5A should just drop into the circuit and work. Let me know if you have any questions or if the customer has any problems using the newer device.

    Best Regards,

    John Wallace

    TI FET Applications

  • 0 in reply to John Wallace1
    TI__Intellectual 900 points

    Hi John,

    Thanks a lot for your reply.

    We have applied for samples for the customer and the customer is preparing for testing. In order to avoid potential dangers, learn about FETs from you.

    I will follow up with the customer's testing and give you feedback.

    Thanks  again for your technical support!

    Best regards,

    Fengyu