• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 62 subscribers
  • Views 162 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65982DMC: TBT4 device based on Gorilla Creek TI88's TPS65982DMC issue

Lian Guang
Intellectual 290 points
Part Number: TPS65982DMC

Hi  TI engineer

I am developing a TBT4 device based on Gorilla Creek TI88. I found that the GPIO_1 pin of the TPS65982DMC is connected to a USB current detection chip (as shown in the attached image). I do not see this pin used in the firmware configuration tool, can I leave this pin suspended? Or does it need to be set in the firmware?