Hello,
I am using this app note: https://www.ti.com/lit/an/slyt777/slyt777.pdf to try to adjust a TPS62480 Buck converter with a DAC.
Does the design p4, figure 5 would apply to my need ? Do I adjust the Vout with a DAC connected to a Res to the Fb pin ?
Also, I notice that there is a SS/TR pin to the TPS62480. In my current design, it is connected to a 3.3nF cap with GND. Does that means that I need to connect my DAC to this SS/TR pin ?
Regards
