• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 146 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS53015: TPS53015 - Reference design for 10A output current

Natesan Sambasivam
Prodigy 140 points
Part Number: TPS53015

Hi,

We have designed a board using TPS53015 synchronous buck controller. Could you please confirm whether the same circuit can work for 10A load current? As I can't share my design in public forum, please provide the contact email to share.

Regards,

Natesan S

  • 0
    TI__Expert 5026 points

    Hi Natesan,

    You can move to a lower current, if you have designed the circuit for a higher load current. The design may not be optimized for the lower current, but the device will operate safely.

    If you previously designed the circuit for a current less than 10A, then a review needs to be done to ensure that the device and its components are configured for a new, higher current.

    What was your circuit designed for (VIN, VOUT, IOUT, FSW)? You can reach out to me over the E2E private messenger to share the schematic files.

    Best regards,

    Britton