LM5155-Q1: Startup Circuit Simulation

Hi Tom,

When going to Place -> PSpice Component -> Search...
you can open the library and search for the according part.

If the part you are searching for is not implemented in the default library, you have two options:
- Import an external inductor model (Manufacturers most often share PSpice models for their parts online).
However, this will limit the probe during simulation down to 3 probes

- Create a coupled inductor manually
PSpice has a feature for inductor coupling (K_linear or kbreak). With this you can couple normal inductors to a transformer.
There is more information on this feature when you go to Help -> Documentation -> select PSpice, Reference Guides, PSpice Reference Guide, Analog Devices, Coupling

Best regards,
Niklas