• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 113 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ35100: INITCOMP

Yoshinobu Kagawa
Expert 1810 points
Part Number: BQ35100

I understand that INITCOMP is set when voltage, current, and temperature stabilize after Power Up.
If it is not stable, is INITCOMP not set forever?
Or is it forced to be set after a certain time? (If so, after how many seconds?).

Regards,
Kagawa

  • 0
    TI__Guru 57747 points

    INITCOMP is set after the gauge takes readings and performs initialization. There is no mention of "stabilization". If you are seeing it not being set within a few seconds, then let us know the conditions.