Hello,
My customer considers using the TPS3899DL01DSERQ1 with the follwoing conditions.
How does RESET# work when V1 power is shorted to GND or V1 power is not supplied due to a disconnection?
Thank you.
JH
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
My customer considers using the TPS3899DL01DSERQ1 with the follwoing conditions.
How does RESET# work when V1 power is shorted to GND or V1 power is not supplied due to a disconnection?
Thank you.
JH
Hi JH,
If the Vdd falls below Vpor = 700 mV, the output (nRESET) will not be controlled/guaranteed. TI states that this may cause an output that cannot be determined.
TI also recommends placing a 0.1 uF decoupling capacitor close to the Vdd pin.
Hope this helps,
Joshua Austria