Other Parts Discussed in Thread: TPS650061
Hi,
I'm trying to apply the TPS65001 to own system.
To maintain compatibility with existing systems designed based on the TPS650061, I chose the TPS65001 (Same footprint as the TPS650061). However, the SVS function is not required, so I configured the circuit as shown below.
However, during the test, a problem was discovered.
When the power is initially applied, the specified voltage output is observed, but after a certain period of time, the output voltage becomes abnormal and does not operate normally.
I'd like to ask if there are any problem with the SVS-related pin settings.
Thanks and regards,
Sang-il
