Hi,
Need design review of the below design:
Planning to send the design out for manufacturing tomorrow. So any help is really appreciated.
Thanks,
Shyam
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Need design review of the below design:
Planning to send the design out for manufacturing tomorrow. So any help is really appreciated.
Thanks,
Shyam
Hi Shyam,
SHDN/ pin by default has internal pull-up so no need of R101. You can remove R101 resistor.
Rest of the schematic looks good.
BR,
Rakesh