• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 87 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR14050: webench simulation

Anna
Intellectual 930 points
Part Number: LMR14050

Hi Dear,

Simulate LMR14050 using webench,the input and output are shown in the figure.

But Design cannot be created,May I ask what the reason is?

  • 0
    TI__Mastermind 20360 points

    Hi Anna,

    It looks like the load conditions will result in too high of a junction temperature.

    You will find that if you play around with the ambient temperature, you may find something that doesn't violate Webench conditions. 

    Regards,

    Richard