The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24610: BQ24610 schematic query

Part Number: BQ24610

Hi 

The customer design with BQ24610, please confirm whether the circuit in the figure below is feasible.

A MOS tube is added at the place of voltage sampling, the purpose of this is that when the battery is only connected, the resistance sampling network is open, which can reduce the quiescent current and consider low power consumption. I don’t know if it is feasible?

The gate pin of the MOS is changed to be controlled by a MCU, does it feasible?

Please help check it.

Thanks

Star