Hello,
I would like to ask you about the I2C voltage of the BQ25618E.
In the I2C item of the I electrical characteristics of the data sheet, it is pulled up at 1.8V as a condition.
I want to pull up at 3.3V, is that ok?
Best regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I would like to ask you about the I2C voltage of the BQ25618E.
In the I2C item of the I electrical characteristics of the data sheet, it is pulled up at 1.8V as a condition.
I want to pull up at 3.3V, is that ok?
Best regards,
Sorry.
I got the pullup voltage wrong.
Correctly, pull up at 3V.
Best regards,
Hello,
Thank you for reaching out via E2E. Yes it is okay to have the I2C pullup at 3V or 3.3V.
Best Regards,
Garrett