• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 61 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65911: Pull-up destination of SDA_SDI and SCL_SCK

Dice-K
Mastermind 6330 points
Part Number: TPS65911

Hi support team,

Is there any specification for the pull-up destination of SDA_SDI and SCL_SCK?
The datasheet is pulled up to VDDIO.
Is it possible to pull up by 3.3V that input to VCC6?

Regards,
Dice-K