Hello,
I want to use the TPS38700 with as many sequencing outputs as possible, but the datasheet is very confusing.
There are mentions of all 12 being available in table 10.2, but table 10.1 immediately above says sequencer with NEM_PD. Also figure 5.1 refers to an 11-channel sequencer rather than 12.
Does this imply that the EN10 output is not available (always used as NEM_PD) and that the other 11 channels are available?
In table 8-14, showing the bits of the EN_ALT_F register, it says these bits are read only and loaded from NVM. That is not very helpful, when there is nothing to say what values are stored in NVM!
For the only device currently available (TPS38700C04NRGER), can you confirm the NVM read-only value in register 0x20 (EN_ALT_F), and confirm what functions are available on EN9, EN10, EN11 and EN12?
Thanks,
Gordon.