Hi,
Does TI have below E-fuse protection IC with AEC-Q100? I found some prodcut can meet below spec but seems no one have AEC-Q100.
Vin 9V~18V
Iout 8A
Thanks!
Jeff
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Jeff,
No eFuse but you can check ideal diode. Other option is to parallel TPS25940Q1.
Regards
Kunal Goel
Hi Jeff,
Paralleling is possible. During steady state balancing will not be a problem. Just during startup current mismatch can be high.
Regards
Kunal Goel